Skip to content
VeraDial
Canada — mobile

How to forward calls from Bell Mobility

Setup path — Bell Mobility publishes no dial codes VeraDial could verify, so this guide uses the settings route.

Updated June 15, 2026

The short answer

Bell Mobility doesn't have verified dial codes, so use your phone's call-forwarding settings or Bell Mobility's official instructions to forward calls to the number you choose. The steps below walk through it.

Bell Mobility's own instructions are the source of truth

VeraDial hasn't verified tap-to-dial codes for Bell Mobility, so start with the official setup guide. The steps below are the generic path if you'd rather do it from your phone settings.

Official Bell Mobility instructions

Every call to your Bell Mobility number goes straight to the number you forward to — your phone never rings.

  1. Set always-forward in phone settings

    Open your carrier or phone call-forwarding settings, choose Always forward, and enter your VeraDial number.

Bell Mobility-specific notes

  • Bell sets call forwarding from the phone Settings menu (Settings > Call Forwarding), not a dial code.
  • Bell may bill forwarded calls at pay-per-use ($0.25/min) without a forwarding feature on your plan, plus long distance if your VeraDial number is long distance.

Standard forwarding caveats

  • Call forwarding routes voice calls only. Text messages stay with your original carrier.
  • Forwarded calls may use minutes or create carrier charges depending on your plan.
  • Activate forwarding from the phone or SIM that receives the original calls.
  • Carrier forwarding codes can vary by prepaid, business, landline, VoIP, and MVNO plans.

FAQ

Does call forwarding on Bell Mobility forward my text messages too?

No. Call forwarding routes voice calls only. Text messages stay with your original carrier. If you want texts answered too, that needs a separate setup on the receiving side.

Does call forwarding cost extra on Bell Mobility?

Forwarded calls may use minutes or create carrier charges depending on your plan. Bell may bill forwarded calls at pay-per-use ($0.25/min) without a forwarding feature on your plan, plus long distance if your VeraDial number is long distance.

Why do calls still go to my Bell Mobility voicemail instead of forwarding?

With missed-call (conditional) forwarding, carrier voicemail and forwarding race each other — whichever answers first wins. If your carrier voicemail picks up before forwarding kicks in, calls never reach VeraDial. If a test lands in carrier voicemail, disable it or shorten its ring delay.

How do I turn off call forwarding on Bell Mobility?

Open the same call-forwarding settings you used to turn it on and switch forwarding off. Activate forwarding from the phone or SIM that receives the original calls.

Do these steps work on prepaid, business, or MVNO Bell Mobility plans?

Carrier forwarding codes can vary by prepaid, business, landline, VoIP, and MVNO plans. When in doubt, follow Bell Mobility's own instructions at support.bell.ca.

Where to point your forwarding

Forward to a number that answers — not another voicemail

Point your forwarding at a VeraDial number and Vera answers 24/7 — greets the caller, handles routine questions, takes the message, and texts you the transcript.

VeraDial detects your carrier and verifies forwarding with a real test call — it calls your old number from your new one and confirms the call arrives, so you know forwarding works before a customer does.